#精密管#-价格优惠

山东大鼎钢管厂钢管主要用于一般结构和机械结构。其代表性材料（等级）：碳素钢20、45钢；合金钢Q345、20Cr、40Cr、20CrMo、30-35CrMo、42CrMo等。主要用于工程和大型设备的流体管道输送。材料（等级）为20、Q345等。GB3087.1999（20中低压力锅炉用精密钢管）。主要用于工业锅炉和家用锅炉中低压力流体的输送。材料为10钢和20钢。GB5310-1995（高压锅炉用20μm精密钢管）。主要用于电厂、核电站锅炉的高温、高压输送集流体箱和管道。材料为20g、12CR1MOVG、15CRMOG等。

山东大鼎金属材料有限公司Precision seamless steel pipe (cold-drawn and cold-rolled) has high precision, no oxidation coating inside and outside the pipe, smooth and smooth surface, uniform wall thickness, high precision, small diameter of thin-walled tube to ensure that the error of the outside diameter of the tube in the inner and outer surface of the pipe presents varying degrees and quantities of corrugated ring marks, some are continuous, some are intermittent, may be the entire circle, there are. Not the whole circle. poor quality of pickling and lubrication, increase and change of friction during drawing, mechanical properties of steel pipe in length direction after heat treatment are not consistent, mandrel length and fineness are too large, and the position of mandrel before.

山东大鼎钢管厂拥有台大中型冷拔机、两台辊底热处理炉、台大中型穿孔机和台热轧钢管机组三套先进的生产设备和成熟的生产工艺。公司拥有现代化的科研中心，拥有强大的性能测试、工艺性能测试、涡流测试、超声波测试、水力测试、金相测试、高精度碳硫分析等一整套测试方法，并拥有一批高素质的技术人员和检查员。硬度试验是根据规定的条件将硬质压头缓慢压入试样表面，然后测试压痕深度或尺寸，从而确定材料的硬度。